2024 Elmer's Manufacturing Solid Pull Super 7 7 – 90’

2024 Elmer's Manufacturing Solid Pull Super 7 7 – 90’

Swipe to View More

  • Year 2024
  • Make Elmer's Manufacturing
  • Model Solid Pull Super 7
2024 Elmer's Manufacturing Solid Pull Super 7 7 – 90’

2024 Elmer's Manufacturing Solid Pull Super 7 7 – 90’

2024 Elmer's Manufacturing Solid Pull Super 7 7 – 90’

Solid Pull SUPER 7 harrow

The Solid Pull Super 7 Harrow is equipped with solid pull arms and Secure Lock, a custom hydraulic locking system, to increase the harrow's capabilities and safety. It has the same great features as past models, including the 7-bar design and three dimensions of adjustability. The 7-bar design creates up to 40% more harrowing action compared to 5-bar harrows while the three dimensions of adjustability adapt to the needs of your field. The 40-90 degrees of tine angle adjustment allows for more or less harrowing, 10 inches of vertical down pressure for how much pressure is onto the field and section angle control for ideal residue and seedbed management.

ONE HARROW FOR IT ALL

The Solid Pull Super 7 Harrow gives you full control to chop straw, spread residue and incorporate seed and chemicals without compromising on your field finish.

ADAPTABLE TO YOUR NEEDS

Tine Angle, Section Angle and Pitch allow you to set your aggressiveness to your desired field finish whether that is in straw or residue management or in seedbed preparation.

GET 40% MORE DONE PER PASS

The Solid Pull Super 7 Harrow with 7 bars of tines allows you to get 40% more done per pass in comparison to a 5-bar harrow.

Engine

Engine Power Recommended Power: 450+ Hp

Wheels & Tires

Wheels 550 / 45 - 22.5 (16 ply) | Wing: 360 / 60 - 22.5 (16 ply)

Electric

Electrical 12 Volt Amperage: 15 Amps

Hydraulics

Hydraulic Flow Min: 10 GPM / Max: 35 GPM
Maximum Pressure Recommended Min Hydraulic Pressure: 2,800 PSI

Dimensions

Dimensions Tine Spacing: 1 7/16” | Harrow Bar Spacing: 14” (35.5cm) | Tine Size 1/2” Diameter x 22” Long | Hitch frame: 4” x 8” - 1/4” Wall Tube | Wing: 8”x8”x3/8” | Angle Adjust: 90°- 45° | Vertical Adjust: 10” | Harrow Section Roll: ±5°
Transport Width 15’
Transport Height 12’10”
Transport Length 64’ 4”

Weights

Weight Approximate: 15,300 lbs

Features

Features Harrow Sections: 9 x 7 Bar | Pul Arm Type: Solid Bar
Tine Arm Quantity 378

Product Photography