2023 Hyundai Construction Equipment Z-Bar And XT Wheel Loaders HL960A XT
- Year 2023
- Make Hyundai Construction Equipment
- Model Z-Bar And XT Wheel Loaders
2023 Hyundai Construction Equipment Z-Bar And XT Wheel Loaders HL960A XT
2023 Hyundai Construction Equipment Z-Bar And XT Wheel Loaders HL960A XT
Hyundai HL900 series wheel loaders deliver maximum performance, productivity, and efficiency. An important feature of the new A-Series machines is the use of Cummins Performance Series engines that comply with the international Stage 5 emissions-control standard. Combined with the engineering and product design expertise of Hyundai, these engines will deliver substantial performance gains from a smaller, lighter power package. Customers will experience more than a 10-percent increase in power and a nearly 20-percent increase in torque compared to previous engines, all while using less fuel.
Add a long list of Hyundai innovations – including an accurate onboard weighing system, unique bucket design for better load retention, and free use of Hyundai’s Hi-Mate cellular-based remote management system for five years – and you’ll find the HL900 A series offers unbeatable value.
Features may include:
RELIABILITY- Hyundai construction equipment is precision designed with trusted and proven components and systems from leading OEM’s. The HL960A is designed to be rugged and reliable for longer up time, reduced operating cost and improved productivity.
- Hyundai construction equipment is manufactured with the highest grade of steel due to Hyundai’s dominance in the steel and shipbuilding industries. Rigid cycle testing, heat testing, vibration testing, and shock load testing is conducted in the design and manufacturing process of all new models insuring optimum durability and reliability.
- Hyundai’s improved bucket design features an innovative wider opening, curved side plates, and enhanced spill guard to maximize bucket capacity and reduce material loss when traveling. Durability is enhanced through the use of wear-resistant HARDOX 400 grade steel in key structural areas of the bucket.
Engine
Engine Manufacturer
CUMMINS / B6.7
Engine Power
Gross Power (SAE J1995): 225 HP (168 kW) at 2,200 rpm | Net Power (SAE J1349): 222 HP (166 kW) at 2,200 rpm | Max. Power: 251 HP (188 kW) at 1,900 rpm
Engine Type
diesel engine with No Manual Regeneration.
Emissions
Tier 4F/ Stage V Emission Certified
Cylinder Liners
6 cylinders
Engine Torque, Maximum
(SAE J1995): 875 lb·ft (1,186 N·m) at 1,300 rpm
Displacement
6.7 L (408 cu in)
Drivetrain
Transmission
Torque Converter: 3-Elements, Single-stage, Single phase
Relief Valve Setting
210 bar (3,046 psi)
Steering
Type Load sensing hydrostatic articulated steering
Cylinder Liners
Double acting: 2-80 mm (3.15") × 424 mm (16.7")
Brakes
Brake System Type
Hydraulically actuated, wet disc brakes actuate all 4 wheels independent axle-by-axle system. Self adjusting & wheel speed brake. | Travel: Four-wheel, Outboard, wet-disc type, full hydraulic | Emergency: When brake oil pressure drops, indicator light alerts operator and parking brake automatically applies
Parking Brake
Spring-applied, hydraulically released brake
Steering Angle, Left
40°
Steering Angle, Right
40°
Wheels & Tires
Wheels
Type Tubeless, loader design tires
Tires, Front Specification
Standard: 23.5 R25, L3
Tires, Rear Specification
Standard: 23.5 R25, L3
Operational
Operating Conditions
Max. drawball pull: 11,400 kgf (25,100 lbf)
Operating Speed
Swing: 9.7 rpm
Top Speed
Forward: 1st: 6.4 km/h (3.9 mph) - 6.7 km/h (4.1 mph) | 2nd: 12.1 km/h (7.5 mph) - 11.8 km/h (7.3 mph) | 3rd: 24.5 km/h (15.2 mph) - 18.2 km/h (11.2 mph) | 4th: 39.0 km/h (24.2 mph) - 28.4 km/h (17.5 mph) | 5th: - 40.0 km/h (24.8 mph) | Reverse: 1st: 6.8 km/h (4.2 mph) - 7.1 km/h (4.4 mph) | 2nd: 12.8 km/h (7.9 mph) - 12.5 km/h (7.7 mph) | 3rd: 25.7 km/h (15.9 mph) - 29.9 km/h(18.5 mph)
Drive System
Four-wheel drive system
Performance
Noise Level
Operator sound pressure (ISO 6396:2008): 68 dB(A) | Exterior sound power (ISO 6395:2008): 105 dB(A
Hydraulics
Hydraulic Type
Load sensing hydraulic system
Hydraulic Pump
Maximun: 239 l /min (63.1 gal/min) at 2,130 rpm | Steering: 148.5 l/min (39.2 gal/min)
Maximum Pressure
28,000 kPa (4,061 psi) | Steering: 3,046 psi (21,000 kPa)
Cylinder Liners
No. of cylinders bore X stroke: Lift 2-140 × 765 mm (2-5.5" × 30.1") | HL960A XT Tilt: 1-160 × 530 mm (1-6.3" × 20.9")
Cycle Time
Raise from Carry Position: 5.9 Sec. | Dump, at maximum raise: 1.5 Sec. | Lower, empty, float down: 3.5 Sec. | Total : 10.9 Sec
Features
Lift Circuit: The valve has four functions; raise, hold, lower and float can adjust automatic kickout from horizontal to full lift. | Tilt Circuit: The valve has three functions: tilt back, hold and dump. Can adjust automatic bucket positioner to desired load angle.
Dimensions
Dimensions
Hinge Pin Height at Carry Position: 600 mm (2') | Lift Arm Clearance at Maximum Lift: 3,885 mm (12' 9'') | Dump Clearance at Maximum Lift and 45° Discharge: 3,365 mm (11') | Reach at Maximum Lift and 45° Discharge: 1,380 mm (4' 6'') | Dump Angle at Maximum Lift and Dump (on Stops): (50°) | Roll Back Angle Ground: (42°) | Carry (47°) | Clearance Circle (Diameter) to Outside of Tires: 12,060 mm (39' 6") | Clearance Circle (Diameter) to Inside of Tires: 6,430 (21' 1")
Ground Clearance
410 mm (1' 4")
Wheelbase
3,300 mm (10' 10")
Overall Length
(Without Bucket): 7,425 mm (24' 4'')
Length
Shipping (With Bucket Level on Ground): 8,695 mm (28' 6'')
Overall Width
(with bucket): 2,896 mm (9’ 6’’)
Width
Over Tires (Unloaded): 2,770 mm (9' 1") | Tread: 1,930 mm (6' 4")
Height
to Top of Exhaust Pipe: 3,340 mm (10' 11") | to Top of Cabin: 3,450 mm (11' 3") | to Top of Product Link Antenna: 3,505 mm (11' 6") | to Top of Warning Beacon: 3,580 mm (11' 9") | Hinge Pin at Maximum Lift: 4,535 mm (14' 11'')
Capacities
Fuel Capacity
tank: 260.0 liters (68.6 US gal)
Cooling System
engine: 42.0 liters (11.1 US gal)
Oil capacity
engine: 23.7 L (6.3 gal)
Axle Capacity, Front
35 liters (9.2 US gal)
Axle Capacity, Rear
35 liters (9.2 US gal)
Hydraulic Capacity
tank: 110 liters (29.0 US gal) | System: 200.0 liters (52.8 US gal) | DEF Tank: 30.0 liters (7.9 US gal) | Crankcase: 18.0 liters (4.7 US gal) | Transmission: 33.0 liters (8.7 US gal)
Cargo Capacity
Heaped: 3.3 m3 (4.3 yd3 ) | Struck: 2.9 m3 (3.8 yd3 )
Load Capacity, Land
Tipping: Straight: 12,950 kg (28,550 lb) | Full Turn: 11,110 kg (24,495 lb)
Weights
Weight, In Running Order
Operating: 20,031 kg (44,160 lb) | Breakout force-bucket: 16,430 kg (36,220 lb)
Features
Features
Steering: Center-point frame articulation. Tilt and telescopic steering column. | Mount: Rigid front axle and oscillating rear axle | Front Axle: Fixed | Rear Axle Oscillation: Oscillating ±11°degrees | Hub Reduction: Planetary reduction at wheel end | Diferential: Conventional | Reduction Ratio: 24.667 | Control valve: 2 spool (Bucket, Boom) / 3 spool (Bucket, Boom, Aux)