2023 Hyundai Construction Equipment Z-Bar And XT Wheel Loaders HL975XT
- Year 2023
- Make Hyundai Construction Equipment
- Model Z-Bar And XT Wheel Loaders
2023 Hyundai Construction Equipment Z-Bar And XT Wheel Loaders HL975XT
2023 Hyundai Construction Equipment Z-Bar And XT Wheel Loaders HL975XT
Hyundai HL900 series wheel loaders deliver maximum performance, productivity and efficiency, and have been proven to deliver as much as 5-percent greater productivity and 10-percent lower fuel consumption than previous models. Add a long list of Hyundai innovations – including an accurate onboard weighing system, unique bucket design for better load retention, and free use of Hyundai’s Hi-Mate remote management system for three years – and you’ll find the HL900 series offers unbeatable value.
Features may include:
RELIABILITY- Hyundai construction equipment is precision designed with trusted and proven components and systems from leading OEM’s. The HL960 is designed to be rugged and reliable for longer up time, reduced operating cost and improved productivity.
- Hyundai construction equipment is manufactured with the highest grade of steel due to Hyundai’s dominance in the steel and shipbuilding industries. Rigid cycle testing, heat testing, vibration testing and shock load testing is conducted in the design and manufacturing process of all new models insuring optimum durability and reliability.
Engine
Engine Manufacturer
Cummins / QSG12
Engine Power
Gross power: 335 HP (250 kw) / 2,100 rpm | Net power: 331 HP (247 kw) / 2,100 rpm
Engine Type
Water-cooled, 4-cycle, turbocharged charge air-cooled, direct-injection, electronically controlled diesel engine
Cylinder Liners
5 cylinders
Compression Ratio
17:1
Engine Torque, Maximum
1,746 N-m (1,287 lb·ft) / 1,400 rpm
Displacement
11.8 l (720 in3
Air Cleaner
Dry, two-stage dual elements
Drivetrain
Transmission
Torque Converter: 3-elements, single-stage, single-phase
Relief Valve Setting
210 kgf/cm2 (2,990 psi)
Steering
Type Load sensing hydrostatic articulated steering
Cylinder Liners
Double acting: 2-100 mm (3.9") X 480 mm (18.9")
Brakes
Brake System Type
Hydraulically actuated, wet disc brakes actuate all 4 wheels independent axle-by-axle system. Self adjusting & wheel speed brake. | Travel: Four-wheel, Outboard, wet-disc type, full hydraulic | Emergency: When brake oil pressure drops, indicator light alerts operator and parking brake automatically applies
Parking Brake
Spring-applied, hydraulically released brake
Steering Angle, Left
40°
Steering Angle, Right
40°
Wheels & Tires
Wheels
Type Tubeless, loader design tires
Tires, Front Specification
Standard: 26.5 R25, L3
Tires, Rear Specification
Standard: 26.5 R25, L3
Battery
Battery
2 x 12 V - 220 Ah
Electric
Alternator
24 V - 110 Amp
Starter
24 V - 7.5 kW
Operational
Operating Conditions
Max. drawball pull: 11,400 kgf (25,100 lbf)
Operating Speed
Swing: 9.7 rpm
Top Speed
Forward km/h (mph): 1st: 6.6 (4.1) - 6.5 (4.0) / 2nd: 11.0 (6.8) - 11.0 (6.8) / 3rd: 24.6 (15.3) - 17.6 (10.9) / 4th: 36.5 (22.7) - 25.2 (15.7) / 5th: – 40.0 (24.9) | Reverse: 1st: 6.6 (4.1) - 6.5 (4.0) / 2nd: 11.0 (6.8) - 11.0 (6.8) / 3rd: 24.6 (15.3) - 25.2 (15.7)
Drive System
Four-wheel drive system
Performance
Noise Level
Operator sound pressure (ISO 6396:2008): 68 dB(A) | Exterior sound power (ISO 6395:2008): 1028dB(A
Hydraulics
Hydraulic Type
Load-sensing hydraulic system | Steering: Load-sensing hydrostatic articulated steering
Hydraulic Pump
Variable-displacement piston pump, 353 l/min (93.2 gpm) | Steering: Variable-displacement piston pump, 211 l/min (55.7 gpm)
Maximum Pressure
280 kgf/cm² (3,983 psi)
Cylinder Liners
No. of cylinders bore X stroke: Lift: 170 mm (6.7") x 795 mm (31.3") | HL975 XT Tilt: 190 mm (7.5") x 585 mm (23.0")
Cycle Time
Raise: 5.9 sec | Dump: 1.7 sec | Lower: 3.9 sec | Total: 11.5 sec
Features
Lift Circuit: The valve has four functions; raise, hold, lower and float can adjust automatic kickout from horizontal to full lift. | Tilt Circuit: The valve has three functions: tilt back, hold and dump. Can adjust automatic bucket positioner to desired load angle.
Dimensions
Dimensions
Front overhang: 3,600 mm (11' 9.7") | Rollback angle on ground: 43° / at carry: 49° | Dump angle: 48° | Clearance circle, over bucket (carry position): 15,100 mm (49' 6.5") | Clearance circle, outside of tires: 13,510 mm (44' 3.9") | Clearance circle, inside of tires: 7,395 mm (24' 3") | Reach Full lift: 1,420 mm (4' 8") / 2,134 mm (7 feet): 2,370 mm (7' 9.3") | Digging depth: 140 mm (5.5")
Bore
132 mm (5.2")
Stroke
144 mm (5.7")
Ground Clearance
460 mm (1' 6")
Wheelbase
3,550 mm (11' 8")
Overall Length
Overall length on ground: 9,640 mm (31' 8") / at carry: 9,530 mm (31' 3.2")
Overall Width
with bucket: 3,250 mm (10' 8") | without bucket: 2,975 mm (9' 9.1")
Overall Height
(Fully raised): 6,455 mm (21' 2")
Height
Bucket pivot max.: 4,790 mm (15' 8.6")) | Over exhaust: 3,515 mm (11' 6.4") | over cab: 3,590 mm (11' 9.3") | Dumping clearance at max. and 45° dump angle: 3,485 mm (11' 5")
Capacities
Fuel Capacity
tank: 400 l (105.6 US gal)
Cooling System
46.0 l (12.2 US gal)
Axle Capacity, Front
51.0 l (13.5 US gal)
Axle Capacity, Rear
40.0 l (10.6 US gal)
Hydraulic Capacity
tank: 166 l (43.9 US gal) | System: 300 l (79.3 US gal) | DEF Tank: 56.8 l (15.0 US gal) | Crankcase: 34.0 l (9.0 US gal) | Transmission: 48.0 l (12.7 US gal)
Cargo Capacity
Heaped: 4.8 m3 (6.3 yd3) | Struck: 4.1 m3 (5.3 yd3) | Earth/clay: 1.5~1.7 tons / m3 (2,528~2,865 lb / yd3 ) | Sand and gravel: 1.5~1.7 tons / m3 (2,528~2,865 lb / yd3 ) | Aggregate 25~76 mm (1" to 3"): 1.6~1.7 tons / m3 (2,697~2,865 lb / yd3 ) | 19 mm (3") and larger: 1.8 tons / m3 (3,034 lb / yd3 )
Load Capacity, Land
Tipping: Straight: 20,000 kg (44,090 lbs) | Full Turn: 13,975 kg (30,810 lbs)
Weights
Weight, In Running Order
Operating: 18,350 kg (40,455 lbs) | Breakout force-bucket: 16,790 kg (37,015 lbs)
Features
Features
Steering: Center-point frame articulation. Tilt and telescopic steering column. | Mount: Rigid front axle and oscillating rear axle | Front Axle: Fixed | Rear Axle Oscillation: ±11° of center pin-loaded | Hub Reduction: Planetary reduction at wheel end | Diferential: Hydraulic lock (front) / conventional (rear) | Reduction Ratio: 27.0 | Control valve: 2 spool (Bucket, Boom) / 3 spool (Bucket, Boom, Aux)