2023 Hyundai Construction Equipment Z-Bar And XT Wheel Loaders HL975XT

Information

2023 Hyundai Construction Equipment Z-Bar And XT Wheel Loaders HL975XT

Hyundai HL900 series wheel loaders deliver maximum performance, productivity and efficiency, and have been proven to deliver as much as 5-percent greater productivity and 10-percent lower fuel consumption than previous models. Add a long list of Hyundai innovations – including an accurate onboard weighing system, unique bucket design for better load retention, and free use of Hyundai’s Hi-Mate remote management system for three years – and you’ll find the HL900 series offers unbeatable value.

Features may include:

RELIABILITY
  • Hyundai construction equipment is precision designed with trusted and proven components and systems from leading OEM’s. The HL960 is designed to be rugged and reliable for longer up time, reduced operating cost and improved productivity.
DURABILITY
  • Hyundai construction equipment is manufactured with the highest grade of steel due to Hyundai’s dominance in the steel and shipbuilding industries. Rigid cycle testing, heat testing, vibration testing and shock load testing is conducted in the design and manufacturing process of all new models insuring optimum durability and reliability.

Photos

Highlights

  • Arborg, Manitoba
  • 2023
  • Hyundai Construction Equipment
  • Z-Bar And XT Wheel Loaders HL975XT
  • Torque Converter: 3-elements, single-stage, single-phase
  • Available
  • Bucket pivot max.: 4,790 mm (15' 8.6")) | Over exhaust: 3,515 mm (11' 6.4") | over cab: 3,590 mm (11' 9.3") | Dumping clearance at max. and 45° dump angle: 3,485 mm (11' 5")

Specifications

  • 2023
  • Hyundai Construction Equipment
  • Z-Bar And XT Wheel Loaders
  • HL975XT
  • Compact
  • Cummins / QSG12
  • Gross power: 335 HP (250 kw) / 2,100 rpm | Net power: 331 HP (247 kw) / 2,100 rpm
  • Water-cooled, 4-cycle, turbocharged charge air-cooled, direct-injection, electronically controlled diesel engine
  • No. of cylinders bore X stroke: Lift: 170 mm (6.7") x 795 mm (31.3") | HL975 XT Tilt: 190 mm (7.5") x 585 mm (23.0")
  • 17:1
  • 1,746 N-m (1,287 lb·ft) / 1,400 rpm
  • 11.8 l (720 in3
  • Dry, two-stage dual elements
  • Torque Converter: 3-elements, single-stage, single-phase
  • 210 kgf/cm2 (2,990 psi)
  • Type Load sensing hydrostatic articulated steering
  • Hydraulically actuated, wet disc brakes actuate all 4 wheels independent axle-by-axle system. Self adjusting & wheel speed brake. | Travel: Four-wheel, Outboard, wet-disc type, full hydraulic | Emergency: When brake oil pressure drops, indicator light alerts operator and parking brake automatically applies
  • Spring-applied, hydraulically released brake
  • 40°
  • 40°
  • Type Tubeless, loader design tires
  • Standard: 26.5 R25, L3
  • Standard: 26.5 R25, L3
  • 2 x 12 V - 220 Ah
  • 24 V - 110 Amp
  • 24 V - 7.5 kW
  • Max. drawball pull: 11,400 kgf (25,100 lbf)
  • Swing: 9.7 rpm
  • Forward km/h (mph): 1st: 6.6 (4.1) - 6.5 (4.0) / 2nd: 11.0 (6.8) - 11.0 (6.8) / 3rd: 24.6 (15.3) - 17.6 (10.9) / 4th: 36.5 (22.7) - 25.2 (15.7) / 5th: – 40.0 (24.9) | Reverse: 1st: 6.6 (4.1) - 6.5 (4.0) / 2nd: 11.0 (6.8) - 11.0 (6.8) / 3rd: 24.6 (15.3) - 25.2 (15.7)
  • Four-wheel drive system
  • Operator sound pressure (ISO 6396:2008): 68 dB(A) | Exterior sound power (ISO 6395:2008): 1028dB(A
  • Load-sensing hydraulic system | Steering: Load-sensing hydrostatic articulated steering
  • Variable-displacement piston pump, 353 l/min (93.2 gpm) | Steering: Variable-displacement piston pump, 211 l/min (55.7 gpm)
  • 280 kgf/cm² (3,983 psi)
  • Raise: 5.9 sec | Dump: 1.7 sec | Lower: 3.9 sec | Total: 11.5 sec
  • Steering: Center-point frame articulation. Tilt and telescopic steering column. | Mount: Rigid front axle and oscillating rear axle | Front Axle: Fixed | Rear Axle Oscillation: ±11° of center pin-loaded | Hub Reduction: Planetary reduction at wheel end | Diferential: Hydraulic lock (front) / conventional (rear) | Reduction Ratio: 27.0 | Control valve: 2 spool (Bucket, Boom) / 3 spool (Bucket, Boom, Aux)
  • Front overhang: 3,600 mm (11' 9.7") | Rollback angle on ground: 43° / at carry: 49° | Dump angle: 48° | Clearance circle, over bucket (carry position): 15,100 mm (49' 6.5") | Clearance circle, outside of tires: 13,510 mm (44' 3.9") | Clearance circle, inside of tires: 7,395 mm (24' 3") | Reach Full lift: 1,420 mm (4' 8") / 2,134 mm (7 feet): 2,370 mm (7' 9.3") | Digging depth: 140 mm (5.5")
  • 132 mm (5.2")
  • 144 mm (5.7")
  • 460 mm (1' 6")
  • 3,550 mm (11' 8")
  • Overall length on ground: 9,640 mm (31' 8") / at carry: 9,530 mm (31' 3.2")
  • with bucket: 3,250 mm (10' 8") | without bucket: 2,975 mm (9' 9.1")
  • (Fully raised): 6,455 mm (21' 2")
  • Bucket pivot max.: 4,790 mm (15' 8.6")) | Over exhaust: 3,515 mm (11' 6.4") | over cab: 3,590 mm (11' 9.3") | Dumping clearance at max. and 45° dump angle: 3,485 mm (11' 5")
  • tank: 400 l (105.6 US gal)
  • 46.0 l (12.2 US gal)
  • 51.0 l (13.5 US gal)
  • 40.0 l (10.6 US gal)
  • tank: 166 l (43.9 US gal) | System: 300 l (79.3 US gal) | DEF Tank: 56.8 l (15.0 US gal) | Crankcase: 34.0 l (9.0 US gal) | Transmission: 48.0 l (12.7 US gal)
  • Heaped: 4.8 m3 (6.3 yd3) | Struck: 4.1 m3 (5.3 yd3) | Earth/clay: 1.5~1.7 tons / m3 (2,528~2,865 lb / yd3 ) | Sand and gravel: 1.5~1.7 tons / m3 (2,528~2,865 lb / yd3 ) | Aggregate 25~76 mm (1" to 3"): 1.6~1.7 tons / m3 (2,697~2,865 lb / yd3 ) | 19 mm (3") and larger: 1.8 tons / m3 (3,034 lb / yd3 )
  • Tipping: Straight: 20,000 kg (44,090 lbs) | Full Turn: 13,975 kg (30,810 lbs)
  • Operating: 18,350 kg (40,455 lbs) | Breakout force-bucket: 16,790 kg (37,015 lbs)