2024 New Holland Construction Compact Track Loaders C327

2024 New Holland Construction Compact Track Loaders C327

Swipe to View More

  • Year 2024
  • Make New Holland Construction
  • Model Compact Track Loaders
2024 New Holland Construction Compact Track Loaders C327

2024 New Holland Construction Compact Track Loaders C327

2024 New Holland Construction Compact Track Loaders C327

300 Series compact track loaders are reliable workhorses that deliver high performance in all conditions. Model C327 builds on the strength, visibility, power and smooth ride you’ve come to expect from New Holland CTLs with the addition of key enhancements that improve durability, operating ease and overall productivity.

Features may include:

POWER THROUGH TOUGH JOBS

  • The reliable hydraulic system of the C327 delivers fast cycle times, raising in just 3.6 seconds and lowering in only 1.8 seconds, in addition to producing less noise and providing extra-smooth operation due to in-line hydraulic pumps. New Holland Tier 4 Final engines deliver powerful performance, use less fuel, are easy to maintain - decreasing operating costs - and still deliver powerful 74 HP (55 kW) performance to the C327.

SMOOTH RIDE, EXTENDED LIFE

  • The low-profile track undercarriage of the C327 that provides 8 inches (203 mm) of ground clearance makes cleanout a breeze, reduces noise and increases durability. The loader also yields a smoother ride with 55.9 inches (1419 mm) of track on ground, thanks to steel-embedded tracks rolling on the rubber instead of steel. Fewer moving parts than competitive designs mean less complexity and complications, all adding up to longer track life.

LIFT AND CARRY OPERATIONS

  • The radial lift linkage delivers up to 22.3 inches (568 mm) of dump height reach and a maximum dump height of 98 inches (2488 mm) to precisely place loads in the center of high-sided truck boxes or hoppers. With a full rated operating load of 5,400 lbs (2449 kg), 2,700 lbs (1225 kg) at 50% tip and 1,890 lbs (860 kg) at 30% tip, the C327 is optimized for lift-and-carry operations, allowing operators to load material with precision and confidence.?

8” LCD MULTIFUNCTION DISPLAY MAKES OPERATION EASIER

  • The LCD display with an integrated back-up camera helps you operate a 300 Series loader with greater ease and confidence. At 8 inches in size and mounted conveniently on the right forward post, the LCD display puts all the information and tools for greater productivity right where you need it. The display provides key operation data, including engine and performance information, RPM, fuel level, battery voltage, hydraulic oil temperature, engine temperature, and trip screen. The integrated backup camera increases visibility to the rear of the loader, improving operator efficiency and safety. You can set the camera for “always on” or to engage only when shifting the loader into reverse gear.

WIDE, COMFORTABLE CAB WITH SUPERIOR VISIBILITY

  • New Holland 300 Series loaders make comfort a priority to boost productivity on the job. More comfort starts with the cab itself, one of the widest in the industry, so it's easy to enter and exit. Full-covering trim absorbs noise, and the visibility panel on the cab roof gives you a clear view in all directions, even to the raised bucket or attachments.

Engine

Engine Management FPT / F5H FL463A
Engine Power Horsepower per SAE J1349 Gross: 55 kW (74 hp) @ 2500 rpm | Horsepower per SAE J1349 Net: 51 kW (68 hp) @ 2500 rpm
Displacement 3.4 L (207 in3)
Engine Torque Peak: 314 Nm (232 lb-ft) @ 1400 rpm
Bore 99 mm (3.9 in)
Stroke 109 mm (4.3 in)
Aspiration Air intake: Turbocharged with external EGR

Fuel System

Fuel Injection HPCR Direct

Operational

Operating Speed Travel speed, low range: 8.2 km/h (5.1 mph)
Operating Conditions Breakout Force, lift cylinder: 27 kN (6260 lbs) |Breakout force bucket cylinder: 32.3 kN (7270 lbs)

Hydraulics

Ground Pressure (with spec belt): 5.9 PSI
Hydraulic Flow Pump Flow: 91.5 Lpm (24.2 gpm)
Maximum Pressure Relief Pressure: 210 bar (3046 psi)

Dimensions

Dimensions Bucket hinge pin: 3178 mm (125 in) | Top of ROPS: 1998 mm (78.7 in) | Bottom of level bucket, fully raised: 2976 mm (117.1 in) | Dump angle, degrees: 38.1 | Rollback, bucket on ground, degrees: 31 | Track on ground: 1419 mm (55.9 in) | Angle of departure, degrees: 32 | Clearance circle without bucket: 1346 mm (52.3 in) | Clearance circle rear: 1501 mm (59.1 in) | Clearance circle with foundry bucket in carry position: 2187 mm (82.2 in) with 1829 (72") bucket | Clearance circle with low profile bucket on ground: 2181 mm (85.8 in) with 1829 mm (72") bucket | Clearance circle with extended low profile on ground: 2297 mm (90.4 in) with 1829 mm (72") bucket | Track gauge: 1356 mm (53.4 in)
Overall Length without attachment with coupler: 2662 mm (1048 in) | with foundry excavation bucket on ground: 3292 mm (129.6 in) | with low profile bucket: 3388 mm (133.4 in) | with low profile extended bucket: 3512 mm (138.3 in)
Height Bucket hinge pin: 3178 mm (125 in) | Top of ROPS: 1998 mm (78.7 in) | Bottom of level bucket, fully raised: 2976 mm (117.1 in) | Dump reach (max height): 568 mm (22.3 in) @ 38.1° | Rollback, bucket at full height, degrees: 99 | Dump height with foundry/excavating bucket short lip: 2556 mm (100.6 in) @ 38.1° | Dump height with low profile/standard lip bucket: 2488 mm (98.0 in) @ 38.1°
Overall Height with foundry/excavating bucket short lip: 3953 mm (155.6 in) | with low profile/standard lip bucket: 4059 mm (159.4 in) | with low profile extended/long lip bucket: 4148 mm (164.6 in)
Ground Clearance (bottom of belly pan): 203 mm (8 in)
Overall Width 1676 mm (65.9 in)

Capacities

Load Capacity, Land Rater Operating Load @50% tip: 1225 kg (2700 lbs) | Rater Operating Load @ 35% tip: 860 kg (1890 lbs) | Tipping Load: 2449 kg (5400 lbs)

Weights

Weight, In Running Order 3750 kg (8270 lbs)
Weight, As Shipped 3615 kg (7970 lbs)

Product Photography